Garage Door Repair: On Troubleshooting

Installing a garage door can a costly process and replacing it will put an extra burden on your wallet.

This is why it can be a serious headache if your existing garage door is not functioning as smoothly as it should and you are not able to point a finger to the problematic area. If you are still confused with the problems of malfunctioning garage door, check out the garage door repair and troubleshooting guidelines. For more information about garage door installation, maintenance, and repair, Visit Here Now!!

Look around to inspect the Garage Door: The first important thing you need to do is to look around to find out external reasons behind malfunctioning. You will be surprised to know how many problems can be happened due to any small thing or hardware becoming lodged somewhere in the assembling of the garage door. 

Cleaning of garage door_ normally, a thick greasy or gooey material accumulates around the tracks and rollers of the garage door. It will be the result of accumulated dust and dirt. Lack of lubrication also contributes to it. The resulting friction may make the equipment stick. These dirty substances will be removed using a mild household cleaning liquid or soap. After washing everything, make sure you dry them thoroughly.

Lubrication of garage door: Sometimes, the garage door does not function efficiently due to the dry moving parts. Remember that lubrication should be performed twice a month. It is important to avoid the plastic idler bearings. Any good quality household oil or powdered graphite can be used on the rollers and tracks.

Check the condition of torsion springs: Garage door cables and springs are also inspected to keep it running. Extension springs are found on either side of the garage door coming from pulleys. It is good to inspect them to make sure that they are not rusted or worn out. You should call a professional garage door technician to determine if they just need adjustment or replacement. Change the spring in pair to maintain the balance or alignment of the mechanism. However, there is another spring system known as “torsion spring” which is installed on the garage door. These are the high-tensed springs that could be hard and challenging to fix or replace. In this case, consult a professional garage door service is recommended.  

Tighten the moving hardware: Garage doors just like any other electronic equipment are subject to wear and tear over time. All the moving hardware including screws, nuts, bolts, and hinges are not exempted. Since a garage door is frequently moving equipment. You check all the screws, bolts, nuts, and other components involved in the operating mechanism of the garage door. 

Sometimes, just tightening the loose hardware will solve the problem. If you are not able to tighten the screws because of the loose holes, you may use a small piece of wood as filler. You should check hinges to see if they are sagging. You should adjust or replace them accordingly. For the side-hinged garage door, make sure that the wood panel where the hinges are connected is in a good working position.

Check the tracks of the garage door: Inspect the metal tracks of the garage door to find out any dent or bump. Garage door tracks support the rollers to run smoothly. Check their alignment and tap the affected area to get back into the original position. If you are not a handyman, call an experienced garage door expert to deal with your garage door.